AUTOMATED STATIONARY CONTROL POST ON THE BASIS OF THE PEM-2M GAS ANALYZER (ASPK)

APPLICATION AREA: * ENVIRONMENTAL CONTROL OF EMISSIONS IN THE ATMOSPHERE - certification of emission points; - issuing environmental reports; * control over the operation of filters. TECHNOLOGICAL CONTROL OF THE COMBUSTION PROCESS - stable quality of products. MAIN ADVANTAGES * simultaneous control of up to 6 gases; * simultaneous connection of up to 8 sampling points (up to 8 boilers / TSU); * the optical unit provides high accuracy and reliability, is simple and reliable in operation, does not need to be replaced with sensors, and is not afraid of non-regular emissions of large concentrations of the measured gases; * works with a highly dusty environment; * automatic calculation of boiler efficiency, gross emissions, air excess factor; * open system - the ability to connect to the complex of other external devices (flow meters, dust meters, thermocouples, pressure sensors, etc.); * output measurement results to a computer in a convenient form for analysis; * works with any fuel; * flexible configuration, embedded in the enterprise process control system; modular construction of the complex with a self-diagnostic function; * round the clock work offline; RITTAL cabinets with IP 54 protection class are used for equipment placement; WHY YOU HAVE TO TURN INTO OUR COMPANY IF YOU HAVE THE PROBLEM OF EQUIPMENT SOURCES WITH STATIONARY GAS ANALYZERS: 1. We have the necessary competencies, as we have been working in this direction since 1999. 2. We are interested to do our work quickly and efficiently. We are one of the few companies that lives through the development and production of flue gas analyzers. 3. We solve your problems. We sell not just gas analyzers, but complex solutions that take into account the maximum needs of clients, from sampling, delivery and preparation to analysis and delivery of results in the right format with all the necessary calculations. We develop, produce, supply, launch, train, service. 4. Convenient service. Due to the fact that we are a Russian company developer, our service is faster, clearer and more affordable in comparison with foreign manufacturers. 5. By contacting us you will receive not only the price of our solution, but also a lot of useful information that will help you make the right decision when choosing flue gas analyzers. The heart of the Ekomer ASPK complex is the optical gas analyzer ECOMER PEM-2M, created on the basis of scientific developments of scientists of the SB RAS protected by patents of the Russian Federation. Ecomer ASPK is built on the block-modular principle of the layout of individual functional units. The sampling module consists of a heated filter, a sampling probe, a thermocouple, a pressure sensor, and a sampling control module (MUP). MUP provides: - management of the mode of sampling; - management of the mode of aspiration of the filter; - control of the temperature of the filter and the sample transportation line; - collection and transmission of data from external sensors. * Sample transport line –heated and unheated. * The main module consists of a sample preparation unit and an optical gas analyzer PEM-2M. * The remote terminal (personal computer) carries out operational control over all modules of ASPK, collecting, processing and archiving information, displaying information in a convenient for analysis form (tabular and graphical). Software ASPK allows you to connect it to the enterprise process control system. * The aspiration system consists of a compressor, an oil-water cleaning system, impulse lines and local receivers. The aspiration system ensures the cleaning of heated filters, thereby increasing the period of operation of the filters without service, which is very important in dusty conditions (for example, cement production). Gas sample temperature: - standard version - up to 800 ° С; - special design - up to 1000 ° С. The sample flow rate through the gas analyzer is from 1.0 to 4.0 l / min. Pressure in the flue: –400 to +1000 mm of water. Art. Environmental parameters at the installation site: - temperature 5–40 ° С (with installed air conditioning - up to 55 ° С); - relative humidity - up to 80%; - atmospheric pressure - 94–105 kPa. Dimensions: - main module - 600x500x1800 mm; - sampling control module - 600x380x210 mm. Weight ASPK: - main module - not more than 130 kg; - sampling control module - no more than 20 kg; - sampling device - no more than 15 kg. Electrical power ASPK: - single-phase AC network with voltage of 220 V and frequency of 50 Hz. - main module - 600 W; - Main module with air conditioning - 1300 W; - MUP with sampling device - 500 W; - sample transportation line - 40 W / m; - Aspiration compressor - 1–1.5 kW. - digital in RS 485 standard - all signals with appropriate software installed on a remote computer; - current 0–5 mA (4–20 mA) - optional; - digital LCD on the processing module.